![]() Step 8: Once booted into the installer, go into Disk Utility and select View>Show All Devices. Select it and let it load the Monterey installer. Step 7: Once you do this, you should see “Install macOS 12 Beta” or “Install macOS 12” option. Step 6: Once all of this is done, reboot the computer with USB drive plugged in the computer which is set to boot off the drive. Here, open the USB drive and delete the EFI folder and files you see in the drive and replace them with the ones you downloaded above. 4th-gen or above Core i Intel processor (use EFI OpenCore Serie 300.400 and use EFI OpenCore Serie 500)ĭownload the required files from Folders section at /files/?dir=Folders. Once done, launch Explorer ++ as Administrator in Windows.4th-gen or below Core i Intel processor (use EFI OpenCore Serie 100.200).If you don’t have the listed Intel CPU, you can totally skip the following sub-step. However if you have one of the following PCs with Intel CPU, you need to first add some files in the drive before going ahead with the boot up. Still baby steps in this experiment but at least I now have a Hackintool patch to test with the ist in Clover on the external HD.Step 5: Once this is done, you are pretty much ready to boot the USB drive up on your Intel machine to launch macOS installer. But I also want to be able to boot up in Windows and play games using the GFX1080 performance, which is really why I bought the card in the first place. Then try installing Mojave on it and see if/how it runs. I have an external USB drive that also has High Sierra on it that I'm using as a guinea pig for WhateverGreen, specifically, to see if I can boot it up using IGPU only and having it disable NVIDIA entirely thru some other patch. My setup has been running fine for about year now, but like everybody with recent NVIDIA cards I'm stuck at High Sierra waiting for Mojave webdrivers. I only started exploring WhateverGreen this past week. BTW, for the first time ever I was able to use Hackintool to generate a patch without quitting, so I guess that "turn on internal graphics" advice was definitely correct. Probably that was because I hadn't yet configured the headless ID yet. I do notice that doing so increased boot time by about 3 minutes, with the Apple logo and progress bar completely filled-in, but just static for the extra time until finally the desktop appeared. I think I figured out how to enable IGPU in my UEFI, see attached pic. Thanks again for making this tool available to us!! Remember the last used "Framebuffer" setting and apply it on startup just as "Apply Current Patches" is remembered between starts.Tooltips for each of the 10 icons in the top row.In the future: "Check for Hackintool Updates" (and auto download and install updates?).Select Framebuffer (Current Version, MacOS 10.13, MacOS 10.14).Select/Deselect "Check for Clover Updates on Start". ![]() Select/Deselect "Apply Current Patches" (does it make sense to rename this to "Show Current Patches"?).Instead, perhaps a single menu bar item called "Options" (or something similar) in which one can: But I think a "Preferences" dialog incurs too many mouse clicks (when certain functions are to be used or checked repeatedly) and in general I think modal dialogs should be minimized. I also like the idea being able to enable or disable the check for Clover updates on start. The tool is getting better all the time! The ability to mount EFI, convert Base64, modify EDID, and update Clover are much appreciated. Ĭlick to expand.Thanks for the heads up! Just updated the Guide with the new GUI design. Look forward to seeing what your going to come up with. it makes too many assumptions IMO.Īs long as you cover all possible scenario's your setup wizards should be fine, just remember to think them through. it's for this (and other) reason's why I never use Multibeast or can never recommended it. So in this example the ist will be on a physically different drive to MacOS. in this instance Clover must be booted from a EFI partition of a SATA drive, Clover can then load the NvmExpressDxe-64.efi driver and then boot MacOS from a NVMe. for example when using a Z77 Motherboard that does not have native support for NVMe but the user want to run MacOS from a NVMe on a PCIe adapter card. many people I know have to use an alternate drive to Boot Clover from. įor instance Multibeast assumes that Clover is installed on the EFI partition of the drive MacOS is running from. Setup Wizards have to be bullet proof and make no assumptions, if done right they can be a god send, but if done wrong they can make one hell of a mess. Building a CustoMac Hackintosh: Buyer's GuideĬlick to idea of using setup Wizards in Hackingtool is an interesting but bold one, it could really help novices to achieve complex processes with the minimum amount of understanding.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |